Beschreibung
Becker roller shutter motor R12-17-E25 12Nm NHK
2010 140 008 0
- Becker roller shutter motor
- Recommended use: Roller shutters and rolling gates
- No radio receiver
- With manual override (crank handle connection)
- Electronic limit shutdown
- Suitable for winding shafts from Ø 50mm
- Obstacle detection: Switches off in case of obstructions (e.g. freezing) and torque increase
- Intelligent installation management allows for quick limit position adjustments during installation
- Limit position setting: Automatic detection if stoppers are present
- Automatic curtain length compensation: Stretching of the curtain is automatically detected and corrected by the drive
- Limit position status indicator: The drive indicates the absence of a limit position via a brief movement interruption
- Can be connected in parallel
- Image similar (delivery does not include adapters, drive rings, or bearings)
- Installation exclusively with rigid shaft connectors
- Motor protected against overheating
- Suitable for right-hand and left-hand installation
- Nominal torque: 12Nm
- Nominal speed: 17 rpm
- Nominal voltage: 230 V
- Frequency: 50Hz
- Power consumption: 110W
- Current consumption: 0.5A
- Outer diameter: 45mm
- Protection class IP44
- Frequency 50Hz
- Weight: 2.93kg
- Connecting cable: 0.5m length – rubber – H05RR-F4G0.75 – in black
- Total length: 704mm
- Made in Germany
Scope of delivery: 1 motor with connecting cable
