Beschreibung
Becker Roller Shutter Motor R30-17-E01
2030 120 118 0
- Roller shutter motor
- Wired (non-radio)
- With blockage and obstacle detection
- Automatic limit switch detection
- VDE certified
- Smooth, quiet operation
- Automatic fabric length compensation
- Can be wired in parallel without a relay
- Plug-in connection cable
- Overload protection
- This tubular motor is exclusively suitable for use in the roller shutter and roller door sector
- Only rustproof, weather-resistant, and moisture-resistant materials are used to ensure a long service life
- Reduced stress on the shutter and stop due to constant optimization of the stopping forces
- Integrated relay allows multiple motors to be connected in parallel and operated via a single control or switch. The number of connectable motors depends on the load capacity of the interface and the fuse.
- The connection cable is connected to the motor via a plug-in connection, is interchangeable, and is available in various versions and lengths
- In the event of excessive heat generation (e.g., due to continuous operation), a thermal circuit breaker interrupts the power supply to the motor. Operation is possible again after cooling down
- The shutter can overwind the motor head. Use is also possible in the tightest of spaces
- Former/alternative type designations for this motor: R../17PR+, R../17C PR+, R../17C PRO+ (e.g., R8/17C PR+)
- Nominal torque: 30Nm
- Nominal speed: 17 rpm
- Nominal voltage: 230 V
- Frequency: 50Hz
- Power consumption: 210W
- Current consumption: 0.9A
- Outer diameter: 45mm
- Protection class IP44
- Frequency 50Hz
- Total length: 582mm
Scope of delivery: 1 motor with connection cable
