Beschreibung
Becker roller shutter motor L60-11-E25 60Nm NHK
2060 140 003 0
- Becker roller shutter motor
- Recommended application: Roller shutters and roller doors
- without radio
- with manual override
- Electronic limit switch
- Suitable for winding shafts from Ø 63mm
- Obstacle detection: Switches off in the event of obstructions (e.g. freezing) and torque increase
- Intelligent installation management enables fast limit position corrections during installation
- Limit position setting: Automatic detection with existing stops
- Automatic curtain length compensation: Stretching of the curtain is automatically detected and corrected by the drive
- Limit position status indicator: The drive indicates the absence of a limit position with a short movement interruption
- Can be switched in parallel
- Installation exclusively with rigid shaft connectors
- Motor protected against overheating
- Suitable for right and left-hand installation
- Suitable for: SW70
- Nominal torque: 60Nm
- Nominal speed: 11 rpm
- Nominal voltage: 230 V
- Frequency: 50Hz
- Power consumption: 265W
- Current consumption: 1.12A
- Outer diameter: 58mm
- Protection class IP44
- Frequency 50Hz
- Weight: 4.50 kg
- Connection cable: 0.5m length – rubber – H05RR-F4G0.75 – in black
- Total length: 804 mm
- Made in Germany
Scope of delivery: 1 motor with connection cable
