Beschreibung
Becker Roller Shutter Motor R12-17-E01
20101201400
- Roller shutter motor
- Wired
- With blockage and obstacle detection
- Automatic limit detection
- VDE certified
- Quiet, smooth operation
- Automatic curtain length compensation
- Can be connected in parallel without isolation relays
- Plug-in connection cable
- Overload protection
- This tubular motor is intended exclusively for use in roller shutter and roller door applications
- Only rustproof, weather-resistant and moisture-resistant materials are used to ensure a long service life
- Reduced stress on the curtain and end stops due to continuous optimization of stop forces
- An integrated isolation relay allows multiple motors to be connected in parallel and operated via a single control or switch. The number of motors that can be connected depends on the load capacity of the interface and the fuse.
- The connection cable is connected to the motor via a plug-in connection, is replaceable, and is available in various designs and lengths
- In the event of excessive heat generation (e.g., due to continuous operation), a thermal circuit breaker interrupts the power supply to the motor. Once cooled down, operation is possible again
- The curtain can overwind the motor head. Installation is possible even in the tightest of spaces
- Former/alternative model designations for this motor: R../17PR+, R../17C PR+, R../17C PRO+ (e.g., R8/17C PR+)
- Nominal torque: 12Nm
- Nominal speed: 17 rpm
- Nominal voltage: 230 V
- Frequency: 50Hz
- Power consumption: 110W
- Current consumption: 0.5A
- Outer diameter: 45mm
- Protection class IP44
- Frequency 50Hz
- Total length: 528mm
Scope of delivery: 1 motor with connection cable
